This spring Fiat-Chrysler CEO Sergio Marchionne called out the auto industry for the staggering amount of money it wastes in the design and manufacture of cars. His solution is based on classic business principles: consolidate and eliminate redundancy. Local Motors CEO Jay Rogers perceives the same challenge, but he’s attacking it from a completely different direction. For Rogers, the problem stems not from business organization but from the fact that we still build cars the same way we did in 1915, on assembly lines with thousands of individual parts. It doesn’t have to be that way, and the proof is parked in his Knoxville, Tennessee, garage, charged up and ready for a drive.
Local’s answer to the cost-cutting question is the Strati, the first 3D-printed car. It’s a humble (albeit very cool-looking) thing. Built—printed—in Detroit, in collaboration with Oak Ridge National Laboratory in Tennessee, the Strati is a small electric two-seater, the first of many models in the company’s plans. Two factories, scaled to employ 100 people each, are under construction now and scheduled for completion by the end of the year. Local Motors plans to build its own cars, but it could also end up working as a supplier for original-equipment manufacturers, some of whom have met with Rogers already. “One of them said, ‘This would be great for prototyping,’ ” Rogers says. “And I said, ‘Forget prototyping! This is how you make the car.’ ” That’s the radical big idea, the one that prompted Popular Mechanics to bestow a Breakthrough Award on Local Motors last year.
The world’s first 3D-printed car is crude by design, its dashboard looking like stacked silicone beads from a caulking gun. Its flanks, meanwhile, are smooth, resembling the exposed parts of the BMW i3’s matte carbon tub. “We milled the sides to show how that would look,” Rogers says. “Some of the other parts are just how they came out of the printer, so you can see that. But we can make it look however we want. You could put a vinyl wrap on it and the car would still be completely recyclable.”
The Strati is printed from carbon-fiber-reinforced plastic, a versatile, strong, and relatively cheap material that could enable some new approaches to safety. Thanks to the nature of 3D printing, where the car is built in layers squirted from the nozzles of a massive printer, you can embed energy-absorbing crash structures or superstrong seat-belt mounts that are anchored deep in the body. You could bond springy bumpers to cushion pedestrian impacts (right now Local is experimenting with a printable elastic polyurethane material called NinjaFlex). And if you managed to catastrophically damage the tub, you could unbolt the motor and suspension, melt the car down, and print a new one. Of course, the Strati parked in Knoxville doesn’t even have seat belts, but it’s proof of concept.
The prototype I drove is the third that Local has printed and took about 40 hours. The company is currently looking for an electric-powertrain supplier, so for now the Strati has a beefy golf-cart motor as a stand-in. The rear-wheel-drive Strati is envisioned as a city car, but Rogers isn’t blind to the performance possibilities. “If you put a motor with 150 or 200 horsepower in here, it would be a lot of fun,” he says.
It’s a lot of fun already. The rear suspension rides on an aluminum subframe, and with no distinction between body and chassis, the car feels inordinately solid, substantial. There’s some clunking from the stand-in motor, but the car itself is silent. Put a Mitsubishi i-MiEV motor back there and this thing would be a riot.
The last car I tested with a one-piece carbon tub was a McLaren 650S that cost more than $300,000. This Strati, lackluster motor notwithstanding, could cost about $5000. No, it’s not a McLaren. But to the family of five that crams aboard a motorcycle to get around—Rogers recently witnessed exactly that on a trip to India—it might as well be.
Developing countries would love this technology for cheap transportation, but so might the rich guy who wants a thousand-horsepower car of his own design, printed in a production run of one. Or the carmaker that wants to churn out a complete car in ten hours rather than 24, using a fraction of the components. Modern cars are complicated, but the union of 3D printing and electric propulsion—where the motor has just one moving part—points to a future in which that’s no longer a given.
We currently take it for granted that cars are complicated and expensive. When you’re driving the Strati, it’s easy to imagine a day when we take it for granted that they’re not.
This story appears in the September 2015 issue of Popular Mechanics.
This story originally appeared on popularmechanics.com.
This entry passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
from Car and Driver Blog http://ift.tt/1eXItnp
via IFTTT
0 comments:
Post a Comment